Guia de Implementação do Registro Eletrônico de Dispensação ou Fornecimento de Medicamento (REDFM) da RNDS
1.0.0 - STU1 Brazil flag

!!Guia de Implementação do Registro Eletrônico de Dispensação ou Fornecimento de Medicamento (REDFM) da RNDS - Compilação de desenvolvimento local (v1.0.0) construída pelas ferramentas de compilação FHIR (HL7® FHIR® Standard). Veja o Diretório de versões publicadas

Resource Profile: BRCoreLocation - Detailed Descriptions

Page standards status: Informative Maturity Level: 1

Definitions for the br-core-location resource profile.

Instruções sobre como interpretar o conteúdo desta tabela podem ser encontradashere

0. Location
Definição

Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

CurtoDetails and position information for a physical place
Controlo0..*
É modificadorfalse
Resumofalse
Invariantesdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Location.implicitRules
Definição

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

CurtoA set of rules under which this content was created
Comentários

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Controlo0..1
Tipouri
É modificadortrue porque This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Location.modifierExtension
Definição

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CurtoExtensions that cannot be ignored
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadortrue porque Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Resumofalse
Requisitos

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Nomes alternativosextensions, user content
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Location.identifier
Definição

Identificadores externos para este recurso


Unique code or number identifying the location to its users.

CurtoIdentificadores externos para este recursoUnique code or number identifying the location to its users
NotaTrata-se de um identificador de empresa e não de um identificador de recurso (ver discussão)
Controlo0..*
TipoIdentifier
É modificadorfalse
Resumotrue
Requisitos

Organization label locations in registries, need to keep track of those.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Location.status
Definição

active | suspended | inactive


The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

CurtoIndica se o local ainda está em uso.active | suspended | inactive
Controlo10..1
VínculoOs códigos DEVERÃO ser retirados de LocationStatushttp://hl7.org/fhir/ValueSet/location-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/location-status|4.0.1)

Indicates whether the location is still in use.

Tipocode
É modificadortrue porque This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Location.operationalStatus
Definição

O status operacional do local (normalmente apenas para uma cama/quarto)


The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

CurtoO status operacional do local (normalmente apenas para uma cama/quarto)The operational status of the location (typically only for a bed/room)
Controlo0..1
VínculoOs códigos DEVERÃO ser retirados de hl7VS-bedStatushttp://terminology.hl7.org/ValueSet/v2-0116
(preferred to http://terminology.hl7.org/ValueSet/v2-0116)

The operational status if the location (where typically a bed/room).

TipoCoding
É modificadorfalse
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Location.name
Definição

Nome do local usado por humanos


Name of the location as used by humans. Does not need to be unique.

CurtoNome do local usado por humanosName of the location as used by humans
Comentários

If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

Controlo10..1
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Location.alias
Definição

Uma lista de nomes alternativos pelos quais o local é conhecido, ou foi conhecido, no passado


A list of alternate names that the location is known as, or was known as, in the past.

CurtoUma lista de nomes alternativos pelos quais o local é conhecido, ou foi conhecido, no passadoA list of alternate names that the location is known as, or was known as, in the past
Comentários

There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

Controlo0..*
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Requisitos

Over time locations and organizations go through many changes and can be known by different names.

For searching knowing previous names that the location was known by can be very useful.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Location.description
Definição

Detalhes adicionais sobre o local que podem ser exibidos como informações adicionais para identificar o local além do seu nome


Description of the Location, which helps in finding or referencing the place.

CurtoDetalhes adicionais sobre o local que podem ser exibidos como informações adicionais para identificar o local além do seu nomeAdditional details about the location that could be displayed as further information to identify the location beyond its name
Controlo0..1
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Requisitos

Humans need additional information to verify a correct location has been identified.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Location.mode
Definição

instance | kind


Indicates whether a resource instance represents a specific location or a class of locations.

CurtoIndica se uma instância de recurso representa um local específico ou uma classe de locais.instance | kind
Comentários

This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

Controlo0..1
VínculoOs códigos DEVERÃO ser retirados de LocationModehttp://hl7.org/fhir/ValueSet/location-mode|4.0.1
(required to http://hl7.org/fhir/ValueSet/location-mode|4.0.1)

Indicates whether a resource instance represents a specific location or a class of locations.

Tipocode
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Requisitos

When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Location.type
Definição

Tipo de função performada


Indicates the type of function performed at the location.

CurtoTipo de função performadaType of function performed
Controlo0..*
VínculoA menos que não sejam adequados, estes códigos DEVERÃO ser retirados de ServiceDeliveryLocationRoleTypehttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType
(extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

Indicates the type of function performed at the location.

TipoCodeableConcept
É modificadorfalse
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Location.telecom
Definição

Detalhes de contato do local


The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

CurtoDetalhes de contato do localContact details of the location
Controlo0..*
TipoContactPoint
É modificadorfalse
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Location.address
Definição

Endereço do local


Physical location.

CurtoEndereço do localPhysical location
Comentários

Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

Controlo0..1
TipoAddress
É modificadorfalse
Resumofalse
Requisitos

If locations can be visited, we need to keep track of their address.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Location.physicalType
Definição

Forma física do local


Physical form of the location, e.g. building, room, vehicle, road.

CurtoForma física do localPhysical form of the location
Controlo0..1
VínculoPara exemplos de códigos, ver LocationTypehttp://hl7.org/fhir/ValueSet/location-physical-type
(example to http://hl7.org/fhir/ValueSet/location-physical-type)

Physical form of the location.

TipoCodeableConcept
É modificadorfalse
Resumotrue
Requisitos

For purposes of showing relevant locations in queries, we need to categorize locations.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Location.position
Definição

A localização geográfica absoluta


The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

CurtoA localização geográfica absolutaThe absolute geographic location
Controlo0..1
TipoBackboneElement
É modificadorfalse
Resumofalse
Requisitos

For mobile applications and automated route-finding knowing the exact location of the Location is required.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Location.position.modifierExtension
Definição

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CurtoExtensions that cannot be ignored even if unrecognized
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadortrue porque Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Resumotrue
Requisitos

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Nomes alternativosextensions, user content, modifiers
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Location.position.longitude
Definição

Longitude com referência WGS84


Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

CurtoLongitude com referência WGS84Longitude with WGS84 datum
Controlo1..1
Tipodecimal
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Location.position.latitude
Definição

Latitude com referência WGS84


Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

CurtoLatitude com referência WGS84Latitude with WGS84 datum
Controlo1..1
Tipodecimal
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Location.position.altitude
Definição

Altitude com referência WGS84


Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below).

CurtoAltitude com referência WGS84Altitude with WGS84 datum
Controlo0..1
Tipodecimal
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Location.managingOrganization
Definição

Organização responsável pelo provisionamento e manutenção


The organization responsible for the provisioning and upkeep of the location.

CurtoOrganização responsável pelo provisionamento e manutençãoOrganization responsible for provisioning and upkeep
Comentários

This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

Controlo0..1
TipoReference(Organization)
É modificadorfalse
Resumotrue
Requisitos

Need to know who manages the location.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Location.partOf
Definição

Another Location of which this Location is physically a part of.

CurtoOutro local do qual este é fisicamente uma parte deAnother Location this one is physically a part of
Controlo0..1
TipoReference(br-core-location, Location)
É modificadorfalse
Resumofalse
Requisitos

For purposes of location, display and identification, knowing which locations are located within other locations is important.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Location.hoursOfOperation
Definição

Em que dias/horários da semana este local costuma ficar aberto?


What days/times during a week is this location usually open.

CurtoEm que dias/horários da semana este local costuma ficar aberto?What days/times during a week is this location usually open
Comentários

This type of information is commonly found published in directories and on websites informing customers when the facility is available.

Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

Controlo0..*
TipoBackboneElement
É modificadorfalse
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Location.hoursOfOperation.modifierExtension
Definição

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CurtoExtensions that cannot be ignored even if unrecognized
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadortrue porque Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Resumotrue
Requisitos

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Nomes alternativosextensions, user content, modifiers
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Location.hoursOfOperation.daysOfWeek
Definição

mon | tue | wed | thu | fri | sat | sun


Indicates which days of the week are available between the start and end Times.

CurtoDias da semanamon | tue | wed | thu | fri | sat | sun
Controlo0..*
VínculoOs códigos DEVERÃO ser retirados de DaysOfWeekhttp://hl7.org/fhir/ValueSet/days-of-week|4.0.1
(required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

The days of the week.

Tipocode
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Location.hoursOfOperation.allDay
Definição

Se o local está aberto o dia inteiro


The Location is open all day.

CurtoSe o local está aberto o dia inteiroThe Location is open all day
Controlo0..1
Tipoboolean
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Location.hoursOfOperation.openingTime
Definição

Horário de abertura do local


Time that the Location opens.

CurtoHorário de abertura do localTime that the Location opens
Controlo0..1
Tipotime
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Location.hoursOfOperation.closingTime
Definição

Horário de fechamento do local


Time that the Location closes.

CurtoHorário de fechamento do localTime that the Location closes
Controlo0..1
Tipotime
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Location.availabilityExceptions
Definição

Descrição das exceções de disponibilidade


A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times.

CurtoDescrição das exceções de disponibilidadeDescription of availability exceptions
Controlo0..1
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Location.endpoint
Definição

Endpoints técnicos que fornecem acesso aos serviços operados para o local


Technical endpoints providing access to services operated for the location.

CurtoEndpoints técnicos que fornecem acesso aos serviços operados para o localTechnical endpoints providing access to services operated for the location
Controlo0..*
TipoReference(Endpoint)
É modificadorfalse
Resumofalse
Requisitos

Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Instruções sobre como interpretar o conteúdo desta tabela podem ser encontradashere

0. Location
2. Location.identifier
Definição

Identificadores externos para este recurso

CurtoIdentificadores externos para este recurso
NotaTrata-se de um identificador de empresa e não de um identificador de recurso (ver discussão)
4. Location.status
Definição

active | suspended | inactive

CurtoIndica se o local ainda está em uso.
Controlo1..?
6. Location.operationalStatus
Definição

O status operacional do local (normalmente apenas para uma cama/quarto)

CurtoO status operacional do local (normalmente apenas para uma cama/quarto)
8. Location.name
Definição

Nome do local usado por humanos

CurtoNome do local usado por humanos
Controlo1..?
10. Location.alias
Definição

Uma lista de nomes alternativos pelos quais o local é conhecido, ou foi conhecido, no passado

CurtoUma lista de nomes alternativos pelos quais o local é conhecido, ou foi conhecido, no passado
12. Location.description
Definição

Detalhes adicionais sobre o local que podem ser exibidos como informações adicionais para identificar o local além do seu nome

CurtoDetalhes adicionais sobre o local que podem ser exibidos como informações adicionais para identificar o local além do seu nome
14. Location.mode
Definição

instance | kind

CurtoIndica se uma instância de recurso representa um local específico ou uma classe de locais.
16. Location.type
Definição

Tipo de função performada

CurtoTipo de função performada
18. Location.telecom
Definição

Detalhes de contato do local

CurtoDetalhes de contato do local
20. Location.address
Definição

Endereço do local

CurtoEndereço do local
22. Location.physicalType
Definição

Forma física do local

CurtoForma física do local
24. Location.position
Definição

A localização geográfica absoluta

CurtoA localização geográfica absoluta
26. Location.position.longitude
Definição

Longitude com referência WGS84

CurtoLongitude com referência WGS84
28. Location.position.latitude
Definição

Latitude com referência WGS84

CurtoLatitude com referência WGS84
30. Location.position.altitude
Definição

Altitude com referência WGS84

CurtoAltitude com referência WGS84
32. Location.managingOrganization
Definição

Organização responsável pelo provisionamento e manutenção

CurtoOrganização responsável pelo provisionamento e manutenção
34. Location.partOf
CurtoOutro local do qual este é fisicamente uma parte de
TipoReference(br-core-location)
36. Location.hoursOfOperation
Definição

Em que dias/horários da semana este local costuma ficar aberto?

CurtoEm que dias/horários da semana este local costuma ficar aberto?
38. Location.hoursOfOperation.daysOfWeek
Definição

mon | tue | wed | thu | fri | sat | sun

CurtoDias da semana
40. Location.hoursOfOperation.allDay
Definição

Se o local está aberto o dia inteiro

CurtoSe o local está aberto o dia inteiro
42. Location.hoursOfOperation.openingTime
Definição

Horário de abertura do local

CurtoHorário de abertura do local
44. Location.hoursOfOperation.closingTime
Definição

Horário de fechamento do local

CurtoHorário de fechamento do local
46. Location.availabilityExceptions
Definição

Descrição das exceções de disponibilidade

CurtoDescrição das exceções de disponibilidade
48. Location.endpoint
Definição

Endpoints técnicos que fornecem acesso aos serviços operados para o local

CurtoEndpoints técnicos que fornecem acesso aos serviços operados para o local

Instruções sobre como interpretar o conteúdo desta tabela podem ser encontradashere

0. Location
Definição

Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

CurtoDetails and position information for a physical place
Controlo0..*
É modificadorfalse
Resumofalse
Invariantesdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Location.id
Definição

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

CurtoLogical id of this artifact
Comentários

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Controlo0..1
Tipoid
É modificadorfalse
Resumotrue
4. Location.meta
Definição

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

CurtoMetadata about the resource
Controlo0..1
TipoMeta
É modificadorfalse
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Location.implicitRules
Definição

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

CurtoA set of rules under which this content was created
Comentários

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Controlo0..1
Tipouri
É modificadortrue porque This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Location.language
Definição

The base language in which the resource is written.

CurtoLanguage of the resource content
Comentários

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Controlo0..1
VínculoOs códigos DEVERÃO ser retirados de CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Vínculos adicionaisObjetivo
AllLanguagesVínculo máximo
Tipocode
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Location.text
Definição

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

CurtoText summary of the resource, for human interpretation
Comentários

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Controlo0..1
TipoNarrative
É modificadorfalse
Resumofalse
Nomes alternativosnarrative, html, xhtml, display
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Location.contained
Definição

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

CurtoContained, inline Resources
Comentários

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Controlo0..*
TipoResource
É modificadorfalse
Resumofalse
Nomes alternativosinline resources, anonymous resources, contained resources
14. Location.extension
Definição

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CurtoAdditional content defined by implementations
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadorfalse
Resumofalse
Nomes alternativosextensions, user content
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Location.modifierExtension
Definição

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CurtoExtensions that cannot be ignored
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadortrue porque Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Resumofalse
Requisitos

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Nomes alternativosextensions, user content
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Location.identifier
Definição

Identificadores externos para este recurso

CurtoIdentificadores externos para este recurso
NotaTrata-se de um identificador de empresa e não de um identificador de recurso (ver discussão)
Controlo0..*
TipoIdentifier
É modificadorfalse
Resumotrue
Requisitos

Organization label locations in registries, need to keep track of those.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Location.status
Definição

active | suspended | inactive

CurtoIndica se o local ainda está em uso.
Controlo1..1
VínculoOs códigos DEVERÃO ser retirados de LocationStatus
(required to http://hl7.org/fhir/ValueSet/location-status|4.0.1)

Indicates whether the location is still in use.

Tipocode
É modificadortrue porque This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Location.operationalStatus
Definição

O status operacional do local (normalmente apenas para uma cama/quarto)

CurtoO status operacional do local (normalmente apenas para uma cama/quarto)
Controlo0..1
VínculoOs códigos DEVERÃO ser retirados de hl7VS-bedStatus
(preferred to http://terminology.hl7.org/ValueSet/v2-0116)

The operational status if the location (where typically a bed/room).

TipoCoding
É modificadorfalse
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Location.name
Definição

Nome do local usado por humanos

CurtoNome do local usado por humanos
Comentários

If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

Controlo1..1
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Location.alias
Definição

Uma lista de nomes alternativos pelos quais o local é conhecido, ou foi conhecido, no passado

CurtoUma lista de nomes alternativos pelos quais o local é conhecido, ou foi conhecido, no passado
Comentários

There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

Controlo0..*
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Requisitos

Over time locations and organizations go through many changes and can be known by different names.

For searching knowing previous names that the location was known by can be very useful.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Location.description
Definição

Detalhes adicionais sobre o local que podem ser exibidos como informações adicionais para identificar o local além do seu nome

CurtoDetalhes adicionais sobre o local que podem ser exibidos como informações adicionais para identificar o local além do seu nome
Controlo0..1
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Requisitos

Humans need additional information to verify a correct location has been identified.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Location.mode
Definição

instance | kind

CurtoIndica se uma instância de recurso representa um local específico ou uma classe de locais.
Comentários

This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

Controlo0..1
VínculoOs códigos DEVERÃO ser retirados de LocationMode
(required to http://hl7.org/fhir/ValueSet/location-mode|4.0.1)

Indicates whether a resource instance represents a specific location or a class of locations.

Tipocode
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumotrue
Requisitos

When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Location.type
Definição

Tipo de função performada

CurtoTipo de função performada
Controlo0..*
VínculoA menos que não sejam adequados, estes códigos DEVERÃO ser retirados de ServiceDeliveryLocationRoleType
(extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

Indicates the type of function performed at the location.

TipoCodeableConcept
É modificadorfalse
Resumotrue
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Location.telecom
Definição

Detalhes de contato do local

CurtoDetalhes de contato do local
Controlo0..*
TipoContactPoint
É modificadorfalse
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Location.address
Definição

Endereço do local

CurtoEndereço do local
Comentários

Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

Controlo0..1
TipoAddress
É modificadorfalse
Resumofalse
Requisitos

If locations can be visited, we need to keep track of their address.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Location.physicalType
Definição

Forma física do local

CurtoForma física do local
Controlo0..1
VínculoPara exemplos de códigos, ver LocationType
(example to http://hl7.org/fhir/ValueSet/location-physical-type)

Physical form of the location.

TipoCodeableConcept
É modificadorfalse
Resumotrue
Requisitos

For purposes of showing relevant locations in queries, we need to categorize locations.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Location.position
Definição

A localização geográfica absoluta

CurtoA localização geográfica absoluta
Controlo0..1
TipoBackboneElement
É modificadorfalse
Resumofalse
Requisitos

For mobile applications and automated route-finding knowing the exact location of the Location is required.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Location.position.id
Definição

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CurtoUnique id for inter-element referencing
Controlo0..1
Tipostring
É modificadorfalse
Formato XMLNo formato XML, esta propriedade é representada como um atributo.
Resumofalse
44. Location.position.extension
Definição

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CurtoAdditional content defined by implementations
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadorfalse
Resumofalse
Nomes alternativosextensions, user content
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Location.position.modifierExtension
Definição

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CurtoExtensions that cannot be ignored even if unrecognized
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadortrue porque Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Resumotrue
Requisitos

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Nomes alternativosextensions, user content, modifiers
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Location.position.longitude
Definição

Longitude com referência WGS84

CurtoLongitude com referência WGS84
Controlo1..1
Tipodecimal
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Location.position.latitude
Definição

Latitude com referência WGS84

CurtoLatitude com referência WGS84
Controlo1..1
Tipodecimal
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Location.position.altitude
Definição

Altitude com referência WGS84

CurtoAltitude com referência WGS84
Controlo0..1
Tipodecimal
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Location.managingOrganization
Definição

Organização responsável pelo provisionamento e manutenção

CurtoOrganização responsável pelo provisionamento e manutenção
Comentários

This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

Controlo0..1
TipoReference(Organization)
É modificadorfalse
Resumotrue
Requisitos

Need to know who manages the location.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Location.partOf
Definição

Another Location of which this Location is physically a part of.

CurtoOutro local do qual este é fisicamente uma parte de
Controlo0..1
TipoReference(br-core-location)
É modificadorfalse
Resumofalse
Requisitos

For purposes of location, display and identification, knowing which locations are located within other locations is important.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Location.hoursOfOperation
Definição

Em que dias/horários da semana este local costuma ficar aberto?

CurtoEm que dias/horários da semana este local costuma ficar aberto?
Comentários

This type of information is commonly found published in directories and on websites informing customers when the facility is available.

Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

Controlo0..*
TipoBackboneElement
É modificadorfalse
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Location.hoursOfOperation.id
Definição

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

CurtoUnique id for inter-element referencing
Controlo0..1
Tipostring
É modificadorfalse
Formato XMLNo formato XML, esta propriedade é representada como um atributo.
Resumofalse
62. Location.hoursOfOperation.extension
Definição

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

CurtoAdditional content defined by implementations
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadorfalse
Resumofalse
Nomes alternativosextensions, user content
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Location.hoursOfOperation.modifierExtension
Definição

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

CurtoExtensions that cannot be ignored even if unrecognized
Comentários

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Controlo0..*
TipoExtension
É modificadortrue porque Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Resumotrue
Requisitos

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Nomes alternativosextensions, user content, modifiers
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
66. Location.hoursOfOperation.daysOfWeek
Definição

mon | tue | wed | thu | fri | sat | sun

CurtoDias da semana
Controlo0..*
VínculoOs códigos DEVERÃO ser retirados de DaysOfWeek
(required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

The days of the week.

Tipocode
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Location.hoursOfOperation.allDay
Definição

Se o local está aberto o dia inteiro

CurtoSe o local está aberto o dia inteiro
Controlo0..1
Tipoboolean
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Location.hoursOfOperation.openingTime
Definição

Horário de abertura do local

CurtoHorário de abertura do local
Controlo0..1
Tipotime
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Location.hoursOfOperation.closingTime
Definição

Horário de fechamento do local

CurtoHorário de fechamento do local
Controlo0..1
Tipotime
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Location.availabilityExceptions
Definição

Descrição das exceções de disponibilidade

CurtoDescrição das exceções de disponibilidade
Controlo0..1
Tipostring
É modificadorfalse
Valor primitivoEste elemento primitivo pode estar presente, ausente ou ser substituído por uma extensão
Resumofalse
Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Location.endpoint
Definição

Endpoints técnicos que fornecem acesso aos serviços operados para o local

CurtoEndpoints técnicos que fornecem acesso aos serviços operados para o local
Controlo0..*
TipoReference(Endpoint)
É modificadorfalse
Resumofalse
Requisitos

Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

Invariantesele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))